FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 22)

xx SPARC Enterprise M8000/M9000 Servers Service Manual • August 2009
■
Chapter 24 Addition and Deletion of a Rack-mountable Dual Power Feed Option,
Power Cabinet, and M9000 Expansion Cabinet:
Explains the replacement procedures for rack-mountable dual power
feed(RDPF).
■ Chapter 25 Addition and Deletion of CMU, DIMM, IOU, HDD, PCI Cards and
TAPEU:
Explains the procedures for adding a unit to the SPARC Enterprise
M8000/M9000 servers and deleting a unit from the SPARC Enterprise
M8000/M9000 servers.
■ Appendix A System Configuration:
Describes the installation conditions and configuration of the SPARC
Enterprise server.
■
Appendix B Components:
Provides figures showing the components that compose the SPARC Enterprise
servers.
■ Appendix C External Interface Specifications:
Describes the specifications of the connectors provided on the SPARC
Enterprise server unit.
■ Appendix D UPS Controller:
Describes the connection of UPC interface, which controls UPS
(Uninterruptible Power Supply).
■
Appendix E XSCF Unit Replacement When XCP 1040 or 1041 Is in the Server:
Provides a replacement procedure to use when the server uses an older version
of XCP firmware than is present in the replacement XSCFU.
■ Abbreviations
Provides the full spellings of abbreviations used in this manual.
■
Index
Provides keywords and corresponding reference page numbers so that the
reader can easily search for items in this manual as necessary.