FUJITSU SPARC ENTERPRISE M8000 User Manual
Page 345
Chapter 18
AC Section Replacement
18-9
FIGURE 18-6
Removing the Three-phase AC Section (Power Cabinet)
8. Place the removed AC section on an antistatic conductive mat.
9. Mount the replacement AC section by following the removal instructions in
in reverse order. Align the AC section with the slot guides, insert it
carefully, press the lever to the closed position, and secure it firmly.
Caution –
Do not forcibly push the ACS when inserting it, even if it is not moving
smoothly. If the ACS is forcibly inserted despite the presence of any obstruction in a
slot or any problem with a connector pin, serious damage may result.
10. Switch on all main line switches for the AC section (ACS) in the power supply
system.
11. Confirm that the XSCF STANDBY LED (green) on the operator panel remains
lit. If it is blinking, wait until it remains lit.