FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 67)

Chapter 2 Product Overview and Troubleshooting 2-29
2.6.3 Messaging Output
To understand error conditions, collect messaging output information, by using the
commands shown below.
TABLE 2-10 lists the commands for checking the messaging output.
TABLE 2-9 Commands for Checking the Monitoring Output
Command Operand Description
showlogs(8) console XSCF firmware collects console logs of console messages that were output
through the XSCF. This command collects all the console messages displayed to
users.
monitor Logs the messages displayed in the message window of the BUI/CLI.
panic Saves as panic logs the console logs that are logged when a reset is received after
a panic notification.
ipl Collects the console data generated during a period from power-on of a domain
to completion of operating system startup (system running).