FUJITSU SPARC ENTERPRISE M8000 - Manual (Page 248)

10-4 SPARC Enterprise M8000/M9000 Servers Service Manual • August 2009
FIGURE 10-3 OPNL Mounting Location (Front of M9000 with the Expansion Cabinet)
TABLE 10-1 lists the abbreviated name of the OPNL.
10.2 Cold Replacement
In cold replacement, none of the replacement work is performed with the
maintenance menu from a terminal connected to XSCF.
The procedure is as follows.
1. Unlock and open a door of the server.
For details, see Chapter 5 .
2. Change the mode switch setting on the OPNL from the Locked position to the
Service position.
TABLE 10-1 Abbreviated Name of the Operator Panel
Model name Abbreviated name
M8000/M9000 Operator Panel OPNL
OPNL
Base cabinet
Expansion cabinet