FANUC Robotics America V7865* - Manual (Page 101)

101
Boot Menus
C
Boot Menu
The second method of enabling the Intel Boot Agent option is to press the DEL key
during system boot. This will access the BIOS Setup Utility. Proceed to the Chipset
menu, and to the Onboard Devices Configuration sub-menu. Enable the Onboard FP
LAN.
Return to the Chipset menu and proceed to the Exit menu, select “Exit Saving
Changes” and press
ENTER .. When the system prompts for confirmation, press “Yes”.
The computer will then restart the system boot-up.
v02.59 (C) Copyright 1985-2005, American Megatrends, Inc .
NOTE: Options shown may not be available on your system.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Advanced Chipset Settings Intel Montara GML
NorthBridge chipset
Configuration options.
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below section
may cause system to malfunction.
NorthBridge Configuration
SouthBridge Configuration
VME Bridge Configuration
Onboard Devices Configuration