FANUC Robotics America V7865* - Manual (Page 53)

53
Ethernet Controllers
2
Ethernet Controllers
The V7865 supports Ethernet LANs with two Intel Ethernet controllers
(82571 Dual GbE controller). 10BaseT, 100BaseTX and GbE options are supported via
two front panel RJ45 connectors.
10BaseT
A network based on the 10BaseT standard uses unshielded twisted-pair cables,
providing an economical solution to networking by allowing the use of existing
telephone wiring and connectors. The RJ45 connector is used with the 10BaseT
standard. 10BaseT has a maximum length of 100 meters.
100BaseTX
The V7865 also supports the 100BaseTX Ethernet. A network based on a 100BaseTX
standard uses unshielded twisted-pair cables and an RJ45 connector. 100BaseTX has a
maximum length of 100 meters.
1000BaseT
The V7865 supports GbE offering speeds of 1000Mb/s. It is fully compatible with
existing Ethernets, as it uses the same CSMA/CD and MAC protocols. 1000BaseT has
a maximum length of 3000 meters using Single-mode Fiber-Optic cables.
Boot ROM BIOS
The V7865 supports booting on the front panel GbE ports using a ROM Ethernet
BIOS. Refer to Remote Booting on page 99 for more information on remote Ethernet
booting.