FANUC Robotics America V7865* - Manual (Page 84)

84
A
V7865 Product Manual
PMC Connectors and Pinouts (J11 through J14)
The PCI Mezzanine Card (PMC) carries the same signals as the PCI standard;
however, the PMC standard uses a completely different form factor. Tables A-4
through A-7 are the pinouts for the PMC connectors (J11, J12, J13 and J14).
J11 Connector and Pinout
Table A-4 PMC Connector Pinout (J11)
PMC Connector (J11) PMC Connector (J11)
Left Side Right Side Left Side Right Side
Pin Name Pin Name Pin Name Pin Name
1 GND 2 -12 33 FRAME# 34 GND
3 GND 4 INTA# 35 GND 36 IRDY#
5 INTB# 6 INTC# 37 DEVSEL# 38 +5 V
7 BMODE1 8 +5 V 39 PCIXCAP 40 LOCK#
9 INTD# 10 NC 41 SDONE# 42 +3.3V
11 GND 12 NC 43 PAR 44 GND
13 CLK 14 GND 45 +3.3V 46 AD[15]
15 GND 16 GNT# 47 AD[12] 48 AD[11]
17 REQ# 18 +5 V 49 AD[9] 50 +5 V
19 +3.3V 20 AD[31] 51 GND 52 C/BE[0]#
21 AD[28] 22 AD[27] 53 AD[6] 54 AD[5]
23 AD[25] 24 GND 55 AD[4] 56 GND
25 GND 26 C/BE[3]# 57 +3.3V 58 AD[3]
27 AD[22] 28 AD[21] 59 AD[2] 60 AD[1]
29 AD[19] 30 +5 V 61 AD[0] 62 +5 V
31 +3.3V 32 AD[17] 63 GND 64 REQ64#