FANUC Robotics America V7865* - Manual (Page 102)

102
C
V7865 Product Manual
BIOS Features Setup
After the Intel Boot Agent has been enabled, the following information will appear at
the top of the screen.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Initializing Intel (R) Boot Agent GE v1.2.40
PXE 2.1 Build 085 (WfM2.0)
Press Ctrl+S to enter Setup Menu...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Once you press CTRL-S, the Boot Agent setup menu will appear. PXE is the boot
option available on the V7865. You can change the settings for the Setup Prompt and
Setup Menu Wait Time. You can either enable or disable the prompt, and you can set
the amount of wait time for the setup menu.
Select remote boot protocol.
==============================================================
<Esc> <Space> <Enter> <F4>
Cancel Changes Change Value Next Option Save Configuration
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Once the configuration is set, the V7865 will begin to establish the new link.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Initializing Intel (R) Boot Agent GE v1.2.40
Copyright (C) 1997-2006, Intel Corporation
Initializing and establishing link...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Network Boot Protocol PXE (Preboot eXecution Environment)
Boot Order Use BIOS Setup Boot Order
Show Setup Prompt Enabled
Setup Menu Wait Timer 3 Seconds