FANUC Robotics America V7865* - Manual (Page 26)

26
1
V7865 Product Manual
Unpacking Procedures
Any precautions found in the shipping container should be observed. All items
should be carefully unpacked and thoroughly inspected for damage that might have
occurred during shipment. The board(s) should be checked for broken components,
damaged printed circuit board(s), heat damage and other visible contamination. All
claims arising from shipping damage should be filed with the carrier and a complete
report sent to GE Fanuc Embedded Systems Customer Care along with a request for
advice concerning the disposition of the damaged item(s).
CAUTION: Some of the components assembled on GE Fanuc Embedded Systems'
products may be sensitive to electrostatic discharge and damage may occur on boards
that are subjected to a high energy electrostatic field. When the board is placed on a
bench for configuring, etc., it is suggested that conductive material be inserted under
the board to provide a conductive shunt. Unused boards should be stored in the same
protective boxes in which they were shipped.