FANUC Robotics America V7865* - Manual (Page 90)

90
B
V7865 Product Manual
Popup Boot Menu
If the user wishes to boot from a device not currently selected as the first device in the
boot list in setup, there is a shortcut to avoid entering setup to change the list. The
user can press F11 from power-up until the boot menu appears. This menu lists all
currently enabled boot devices (such as hard drives, enabled network controller
option ROMs, USB flash drives or other USB bootable devices). The user selects the
desired boot device and the system attempts to boot from that device. If the Onboard
Devices (see Chipset Setup on page 96) are not enabled, they do not appear in the boot
menu.
NOTE : This is a one-time request; the setup-defined boot order is not changed for
subsequent boots. Note also that if some devices are not bootable (such as a USB
drive, or a USB floppy with a non-bootable disk), the system will not attempt to use
another boot device.
This feature is useful when installing from a bootable disk. For example, when
installing Windows XP from a CD, enter the Popup Boot menu and use the arrow keys
to highlight ATAPI CD-ROM Drive. Press
ENTER to continue with system boot.
If you have trouble accessing this feature, disable the QuickBoot Mode in the Boot
BIOS setup screen. Exit, saving changes and retry accessing the Popup Boot menu.
Please select boot device:
1. + Removable Devices:
2. ATAPI CD-ROM Drive
3. MBA UNDI (Bus 1 Slot 6) LAN 1
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults