Power requirements, Figure 1-3, Installing a pmc card on the v7865 – FANUC Robotics America V7865* User Manual
Page 34
Advertising
34
1
V7865 Product Manual
Power Requirements
The V7865 requires +5V from the VME backplane. Below are the voltage and current
requirements.
Supply
Current (Maximum)
+5V
9.6A
The V7865 provides power to the PMC site in accordance with the PMC specification.
The maximum current provided on the +5V supply is 1.5A per PMC site. The
maximum current provided on the +3.3V supply is 1.5A per PMC site.
Figure 1-3 Installing a PMC Card on the V7865
Third Party
PMC Expansion Board
Advertising