D.2 signal cable, Signal cable – FUJITSU M3000 User Manual
Page 184
Advertising
D-2
SPARC Enterprise M3000 Server Service Manual • February 2011
shows the location of the UPC port on the M3000 server.
FIGURE D-1
UPC Port Locations
Note –
The UPC port is supported only in the AC power supply model.
D.2
Signal Cable
Use the shielded pair cable with the following specifications.
■
Direct current resistance (roundtrip/pair): 400 W/km or less
■
Cable length: Up to 10 m (33 ft.)
UPC0 port
UPC1 port
Rear view
Advertising