FUJITSU M3000 - Manual (Page 43)

Chapter 3 Troubleshooting 3-5
The status of each component can be checked based on the On or blinking state of
the component LEDs.
For the component types and LED states, see TABLE 2-3 and TABLE 2-5 .
For details of commands, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide and the SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.
3.3.1.1 Checking the Hardware Configuration.
To check the hardware configuration, authority (user account) to log in with the
XSCF user account to the XSCF is required. The following procedure can be used to
check the hardware configuration from the maintenance terminal.
Ask the system administrator for the required information, such as the user account
and password. For details, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide.
1. Log in to XSCF Shell.
2. Type showhardconf.
The showhardconf command displays hardware configuration information. For
details, see the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF
User's Guide.
showboards Displays information on the system board (XSB).
showdcl Displays the hardware resource configuration information of a domain.
showfru Displays the setting information of a device.
XSCF> showhardconf
TABLE 3-1 Commands for Checking Hardware Configuration (Continued)
Command Description