FUJITSU M3000 - Manual (Page 193)

Appendix E DC Power Supply Model E-5
E.3 Electrical Specifications
This section describes the electrical specifications of the DC power supply model.
Note – This is equivalent to TABLE B-7 . When using the DC power supply model,
refer to the content described in this appendix.
TABLE E-2 Electrical Specifications
Item Specifications
Frequency of CPU 2.75 GHz/2.86 GHz
Input voltage -48 Vdc -60 Vdc
Number of power cords 2 (one for each power supply unit)
Power cord length 5 m/16.4 ft
Redundancy 1 + 1 redundant configuration
Rated current *
* In a redundant configuration, the rated current per cable is half the value shown in
TABLE E-2 .
10.52 A 8.50 A
Maximum power
consumption
†
† This value applies to the full configuration.
505 W 510 W
Heat dissipation † 1,723.1 BTU/hr
(1818 KJ/hr) 1,740.2 BTU/hr
(1836 KJ/hr)