FUJITSU M3000 - Manual (Page 93)

Chapter 5 Internal Components Access 5-7
5.4 Removing and Attaching the Fan Cover
5.4.1 Removing the Fan Cover
Caution – Before the fan cover is removed, the server must be pulled out from the
equipment rack. For the procedure for pulling the server out from the equipment
rack, see "
Section 5.1, “Sliding the Server Into and Out of the Equipment Rack” on
page 5-1 .
1. Loosen one screw at the right of the fan cover.
2. Raise the right end of the fan cover and remove it ( FIGURE 5-5 ).
FIGURE 5-5 Removing the Fan Cover