First Virtual Communications 1150E - Manual (Page 31)

Connecting the components
31
Before you begin
Connecting the components of the phone
CAUTION
Damage to Equipment
Do not plug your IP Phone 1150E into a regular
telephone jack. This results in severe damage
to the IP Phone. Consult your system
administrator to ensure that you plug your
telephone into a 10/100BaseT Ethernet jack.
CAUTION
Your IP Phone 1150E is designed for use in an
indoor environment only.
WARNING Your IP Phone 1150E is shipped with the
base locked in position. To avoid damaging your phone,
press the wall-mount lever, located under the base, to
release the stand and pull it away from the phone.