First Virtual Communications 1150E - Manual (Page 84)

IP Phone 1150E non-ACD call features
84
To store or change a Speed Call number:
To make a Speed Call:
1. Press the Speed Call Controller Key.
The screen displays Enter Code, then
number.
2. Dial a one, two, or three digit code. Use
the Delete Key if you make a mistake.
Use the Cancel Key to leave the screen
without storing a speed call number. A
dash is automatically inserted after the
required number of digits have been
entered.
3. Dial the associated phone number. Use
the Delete Key if you make a mistake.
Use the Cancel Key to leave the screen
without storing a speed call number.
Note 1: Dial the access code (if
required) followed by the internal,
external, or long-distance phone
number.
Note 2: Press the Pause Key to insert a
1.5 second pause in the dialing string.
4. Press the Done Key to save the code
and number.
1. Press an Individual Line (DN) Key.
SpcCtrl
Done
2637