First Virtual Communications 1150E - Manual (Page 79)

IP Phone 1150E non-ACD call features
79
IP Phone 1150E non-ACD call
features
This section describes non-ACD features commonly used for call
processing. Your network administrator assigns features to your
programmable feature keys. Whenever this guide describes a procedure
that requires special codes ask your network administrator to provide
these to you.
To access a feature, you press a Feature Key, or enter a Flexible Feature
Code (FFC). Your network administrator supplies you with the Flexible
Feature Codes for your system.
Note: To use a feature described in this section, your system
software must support the feature and the feature must be assigned
to your phone. Check with your network administrator for more
details.
Make a call
This section describes features that you can use when you make a call.
There are several ways to make a call from your Nortel IP Phone 1150E.
To make a call from your phone, use the features described in this
chapter.
To make a call:
1. Press an Individual Line (DN) Key. 2637