First Virtual Communications 1150E User Manual

Page 32

Advertising
background image

Connecting the components

32

1.

Remove the stand cover. Pull upward on the center catch as
indicated in Figure 5, and remove the stand cover. The cable routing
tracks are now accessible.

Figure 5: Removing the stand

2.

Connect the AC power adapter (optional). Connect the adapter to the
AC adapter jack in the bottom of the phone. Form a small bend in the
cable, and then thread the adapter cord through the channels in the
stand.

Note 1: Your IP Phone 1150E supports both AC power and Power
over Ethernet options, including IEEE 802.3af Power Classification 3.
To use local AC power, the optional AC adapter can be ordered

WARNING
Use your IP Phone 1150E with the approved Nortel AC
Adapter (model #N0089601) for this model of phone
only.

Advertising