Frye FONIX 7000 - Manual (Page 132)

124
FONIX 7000 Hearing Aid Analyzer
5.4.2 Viewing JIS Results
Figure 5.4.2
See Figure 5.4.2 for the following explanation of test results.
1. OSPL90 response curve
2. Full-on gain response curve measured at 50 or 60 dB SPL
3. Response curve measured at reference test gain at 60 dB SPL
4. Output with a 90 dB input at 500 Hz
5. Output with a 90 dB input at the reference frequency
6. Maximum output and the frequency at which it was measured
7. Gain of the FOG curve at the reference frequency
8. Reference test gain calculated (target)
9. Reference test gain measured (actual)
10. Equivalent input noise
11. Response limit and the two frequencies (F1 and F2) at which the response
curve crosses its horizontal line.
12. Total harmonic distortion at 500, 800, and 1600 Hz
13. Battery current drain with 60 dB input at the reference frequency
14. I/O curve measured at the reference frequency.
15. Attack & release measurements at the reference frequency