Frye FONIX 7000 - Manual (Page 19)

Introduction and Setup
11
1.5 Layout, Controls, and Safety
This section describes the basic layout of the front and rear panel of the 7000
test system, and special information pertaining to safety regulations.
1.5.1 Front Panel Layout
The front panel of the 7000 test system consists of 8 function keys, 4 arrow
keys, and 9 other keys with varying operations. Together, all of these keys are
used to control all the operations of the 7000 test system. A wide internal ther-
mal printer is located to the right of the front panel. See Figure 1.5.1.
POWER
STANDBY
Figure 1.5.1—Front panel
FUNCTION KEYS:
The top row of buttons on the 7000 front panel consists of “function keys”
labeled [F1] through [F8]. The function of these keys change from screen to
screen, according to the need of the screen. There are three basic uses of the
function keys:
RECD Earphone Package
Consists of one ER3A earphone with
a 1⁄4 inch plug, a 72 inch cable, an
assortment of ear tips, a calibration
certificate, and a lapel clip. This pack-
age is suitable for performing an RECD
measurement with the 7000 Test
System.