FUJITSU T5140 - Manual (Page 43)

Chapter 1 Configuring the System Console 21
FIGURE 1-6 Separate System Console and Service Processor Channels
If the system console is configured to be accessible from the serial management and
network management ports, when you connect through one of these ports you can
access either the ILOM command-line interface or the system console. You can
switch between the ILOM service processor prompt and the system console at any
time, but you cannot access both at the same time from a single terminal window or
shell tool.
ok
#
Network management or
Serial management port
System console prompt
->
Service processor prompt
start/SP/console
#.