To obtain the ok prompt, For more information, To obtain the – FUJITSU T5140 User Manual
Page 50: Table 1-3
28
SPARC Enterprise T5140 and T5240 Servers Administration Guide • February 2008
▼
To Obtain the ok Prompt
1. Decide which method you need to use to reach the ok prompt.
See
“OpenBoot ok Prompt” on page 24
for details.
2. Follow the appropriate instructions in
.
For More Information
For more information about the OpenBoot firmware, refer to the OpenBoot 4.x
Command Reference Manual, at:
TABLE 1-3
Ways of Accessing the ok Prompt
Access Method
What to Do
Graceful shutdown of the
Solaris OS
From a shell or command tool window, issue an appropriate command (for
example, the shutdown or init 0 command) as described in Solaris system
administration documentation.
Break key
From an alphanumeric terminal configured to access the system console, press the
Break key.
ILOM commands
From the -> prompt, type the set /HOST send_break_action=break
command provided the operating system software is not running and the server is
already under OpenBoot firmware control. Then issue the start /SP/console
command.
Manual system reset
From the -> prompt, type:
-> set /HOST/bootmode script="setenv auto-boot? false"
Press Enter.
Then type:
-> reset /SYS
-> start /SP/console