Logging in to ilom – FUJITSU T5140 User Manual
Page 54
32
SPARC Enterprise T5140 and T5240 Servers Administration Guide • February 2008
All environmental monitoring and control is handled by ILOM on the ILOM service
processor. The ILOM service processor command prompt (->) provides you with a
way of interacting with ILOM. For more information about the -> prompt, see
Logging In To ILOM
After you log in to your ILOM account, the ILOM service processor command
prompt (->) appears, and you can enter ILOM service processor commands. If the
command you want to use has multiple options, you can either enter the options
individually or grouped together, as shown in the following example.
For instructions on connecting to the ILOM service processor, see:
■
“Accessing the Service Processor” on page 8
■
“Activating the Network Management Port” on page 9
-> stop –force –script /SYS
-> start –script /SYS