To delete a hardware raid volume – FUJITSU T5140 User Manual
Page 84
62
SPARC Enterprise T5140 and T5240 Servers Administration Guide • February 2008
7. Exit the format utility.
The volume can now be used in the Solaris OS.
Note –
The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.
▼
To Delete a Hardware RAID Volume
1. Verify which hard drive corresponds with which logical device name and
physical device name.
See
“Disk Slot Numbers, Logical Device Names, and Physical Device Names” on
.
2. Determine the name of the RAID volume, type:
In this example, the RAID volume is c0t1d0.
Note –
The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.
# raidctl
RAID Volume RAID RAID Disk
Volume Type Status Disk Status
------------------------------------------------------
c0t0d0 IM OK c0t0d0 OK
c0t1d0 OK