FUJITSU T5140 - Manual (Page 57)

Chapter 2 Managing RAS Features and System Firmware 35
Controlling the Locator LED
You control the Locator LED from the -> prompt or with the Locator button on the
front of the chassis.
Steady On Steady state The amber indicator stays on until the service action
is completed and the system returns to normal
function.
Green Off Steady state
Standby blink Repeating
sequence
consisting of a
brief (0.1 sec.) on
flash followed
by a long off
period (2.9 sec.) The system is running at a minimum level and is
ready to be quickly revived to full function.
Example: the System Activity LED.
Steady on Steady state Status normal. System or component functioning with
no service actions required.
Slow blink A transitory (temporary) event is taking place for
which direct proportional feedback is not needed or
not feasible.
TABLE 2-2 System LED Behaviors with Assigned Meanings (Continued)
Color Behavior Definition Description