FUJITSU T5140 - Manual (Page 68)

46 SPARC Enterprise T5140 and T5240 Servers Administration Guide • February 2008
You can use the ILOM set Device_Identifier component_state=enabled command
to reconfigure any device that you previously unconfigured with the
set
Device_Identifier component_state=disabled command.
Displaying System Fault Information
ILOM software enables you to display current valid system faults.
▼ To Display Current Valid System Faults
● Type:
This command displays the fault ID, the faulted FRU device, and the fault
message to standard output. The show /SP/faultmgmt command also displays
POST results.
For example:
For more information about the show /SP/faultmgmt command, refer to the
ILOM guide and the ILOM supplement for your server.
-> show /SP/faultmgmt
-> show /SP/faultmgmt
/SP/faultmgmt
Targets:
0 (/SYS/PS1)
Properties:
Commands:
cd
show
->