FireplaceXtrordinair 44 DV XXL EF - Manual (Page 29)

Finalizing the Installation
(for qualified installers only)
2 9
Travis Industries 4050114 1 0 0 - 0 1 1 4 9
1 Remove the glass (and arch covers) following the directions below.
Warning: The appliance must be completely cool before removing the glass.
Warning: To prevent damage, do not abuse, strike, or slam the glass shut.
Note: Attach the arch covers after re-installing the glass.
Open the six latches holding the glass
frame in place (start with the bottom
three) - follow the directions shown to
the right.
a
The arch covers (included
in the owner's pack) block
light from exiting the scroll
work on arched faces.
The covers hang on the
glass frame.
Arch Faces:
Attach arch covers before
installing the face.
Rectangular Faces:
Discard the arch covers.
Arch Cover
Glass
Glass
Frame
Arch Covers (both sides)
Twist 1/4 turn.
The spring pin will
disengage from the
latch bracket,
opening the latch.
Latch Bracket
Insert the 1/4” key
into the spring
pin.
Glass
Top of
Firebox
Spring Pin
Glass Frame
Lift the glass frame up and
pull it forward to remove.
b
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE:
You may need to lift
the glass frame
while re-attaching.