FireplaceXtrordinair 44 DV XXL EF - Manual (Page 52)

5 2
Optional Equipment
(for qualified installers only)
Travis Industries 4050114 1 0 0 - 0 1 1 4 9
3 Attach the starter ring to the fireplace following the directions below (use the most convenient
side).
Bend the tabs on the bottom of
the starter ring up to lock it in
place.
1/4" Nutdriver
Remove and discard the
cover plate.
Starter Ring
4 Install the air duct. Each section, when joined, must be attached with three screws and duct tape (U.L. 181A-P
or equivalent). Secure the duct if it is in an area where it may sag or become dislodged.
NOTE: The air duct has a 0” clearance to combustibles.
Secure all ducting
together with screws.
Then seal the seams
with aluminum duct
tape (U.L. 181A-P or
equivalent).