FieldServer FS-8700-84 - Manual (Page 16)

FS-8700-84_Lutron_eLumen Driver Manual Page 13 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
4.1.9. System Monitor Command – Serial Number
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Scan_Interval, Data_Array_Name, Data_Array_Offset, Function, Node_Name, GRAFIK_command, Length
Serial_num, 5s, Serial_num, 0, rdbc, LUT_GRF6_0, serial_no, 1
Data storage in Data Array
Position from offset
Description
0 Serial number
4.1.10. System Monitor Command – Area Status
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Scan_Interval, Data_Array_Name, Data_Array_Offset, Function, Node_Name, GRAFIK_command, Area, Length
Area_sts_00, 1s, Area_status, 0, rdbc, LUT_GRF6_0, Area_status, 0, 2
Area_sts_01, 1s, Area_status, 2, rdbc, LUT_GRF6_0, Area_status, 1, 2
Data storage in Data Array
Position from offset
Description
0 System scene on status
1 Sequence running status
Note: This command stores 2 data values. To prevent overlaps, remember to increment Data_Array_Offset by 2 when referencing the same Data
Array with other Map Descriptors.