FieldServer FS-8700-84 - Manual (Page 24)

FS-8700-84_Lutron_eLumen Driver Manual Page 21 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
4.1.27. System Control Commands containing no Parameters: Output temp scene
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, GRAFIK_command, DA_Lut_List, DA_Lut_List_Offset, Length
Output_tmp_scn, Lut_triggers, 10, awt, LUT_GRF6_0, output_temp_scene, Op_Tmp_Scene, 0, 1
DA_Lut_List data setup
Position from DA_Lut_List_Offset
Description
0 Zone 0
1 Intensity 0
2 Fade 0
3 Delay 0
4 Zone number 1
5 Intensity 1
6 Fade 1
7 Delay 1
.. ..
60 Zone
15
61 Intensity 15
62 Fade 15
63 Delay 15
Note: 1 to 16 temp scenes may be selected by this command. To trigger this command, write the number of temp scenes to output into the Data
Array specified by Data_Array_Name at Data_Array_Offset.