FieldServer FS-8700-84 - Manual (Page 37)

FS-8700-84_Lutron_eLumen Driver Manual Page 34 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
4.1.49. Active read on startup: Retrieving names
Warning: Only one (1) active read on startup Map Descriptor may be used.
The retrieval of area, scene and zone names is done with a single active read on startup (ars ) Map Descriptor. Enter the
start and end numbers for the names you want to retrieve from the eLumen. The names will be stored sequentially in the
indicated Data Arrays
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name, Function, Node_Name, GRAFIK_command, DA_Area_Names, DA_Area_Names_Offset, Area_Names_Start, Area_Names_End,
Get_Names, ars, LUT_GRF6_0, get_names, Area_Names, 0, 0, 511,
DA_Scene_Names_Offset, Scene_Names_Start, Scene_Names_End, DA_Zone_Names, DA_Zone_Names_Offset, Zone_Names_Start, Zone_Names_End, Length
0, 0, 50, Zone_Names, 0, 0, 511, 1
Area names storage format
Position from DA_Area_Names_Offset
Description
0 Area (name_start) name
40 Area (name_start+1) name
80 Area (name_start+2) name
..
40 * name_end
Area (name_end) name
Scene names storage format
Position from DA_Scene_Names_Offset
Description
0 Scene (name_start) name
40 Scene (name_start+1) name
80 Scene (name_start+2) name
..
40 * name_end
Scene (name_end) name
Zone names storage format
Position from DA_Zone_Names_Offset
Description
0 Zone (name_start) name
40 Zone (name_start+1) name
80 Zone (name_start+2) name
..
40 * name_end
Zone (name_end) name