FieldServer FS-8700-84 User Manual
Page 35
FS-8700-84_Lutron_eLumen Driver Manual
Page 32 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
4.1.45.
System Control Commands Containing Parameters: Set system variable value
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name,
Data_Array_Name,
Data_Array_Offset,
Function,
Node_Name,
GRAFIK_command,
DA_Lut_List,
DA_Lut_List_Offset,
DA_Lut_Parms,
DA_Lut_Parms_Offset,
Length
Set_sys_var,
Lut_triggers,
28,
awt,
LUT_GRF6_0,
set_sys_var_val,
Var_list,
0,
Var_pars,
0
1
DA_Lut_List setup
Position from DA_Lut_List_Offset
Description
0-31
System variable numbers
DA_Lut_Parms setup
Position from DA_Lut_Parms_Offset
Description
0 New
value
4.1.46.
Listening to switch presses and releases: Enabling switch presses and releases reporting
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name,
Data_Array_Name,
Data_Array_Offset,
Function,
Node_Name,
GRAFIK_command,
length
Ena_sw_lsn,
Sw_lsn_trigger,
0,
awt,
LUT_GRF6_0,
enable_sw_listen,
1
Note: To enable the reporting of switch presses and releases, write any value into the Sw_lsn_trigger Data Array at offset specified by
Data_Array_Offset.
4.1.47.
Listening to switch presses and releases: Disabling switch presses and releases reporting
// Client side Map Descriptors
Map_Descriptors
Map_Descriptor_Name,
Data_Array_Name,
Data_Array_Offset,
Function,
Node_Name,
GRAFIK_command,
length
Dis_sw_lsn,
Sw_lsn_trigger,
1,
awt,
LUT_GRF6_0,
disable_sw_listen,
1
Note: To disable the reporting of switch presses and releases, write any value into the Sw_lsn_trigger Data Array at offset specified by
Data_Array_Offset.