FieldServer FS-8700-84 User Manual

Page 20

Advertising
background image

FS-8700-84_Lutron_eLumen Driver Manual

Page 17 of 36


FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

4.1.17.

System Control Commands containing no Parameters: – Halt Zone

// Client side Map Descriptors

Map_Descriptors

Map_Descriptor_Name,

Data_Array_Name,

Data_Array_Offset,

Function,

Node_Name,

GRAFIK_command,

DA_Lut_List,

DA_Lut_List_Offset,

Length

Zone_halt,

Lut_triggers,

0,

awt,

LUT_GRF6_0,

halt_zone,

Zone_list,

0,

1


DA_Lut_List data setup
Position from DA_Lut_List_Offset

Description

0-63

Zone(s) to halt


Note: After setting up the zone numbers to halt in the DA_Lut_List Data Array, trigger this command by writing the number of zones to halt into the
Data Array specified by Data_Array_Name at an offset specified by Data_Array_Offset.

4.1.18.

System Control Commands containing no Parameters: – Stop Scene Ramp Up

// Client side Map Descriptors

Map_Descriptors

Map_Descriptor_Name,

Data_Array_Name,

Data_Array_Offset,

Function,

Node_Name,

GRAFIK_command,

DA_Lut_List,

DA_Lut_List_Offset,

Length

Stop_scn_rmp_up,

Lut_triggers,

1,

awt,

LUT_GRF6_0,

stop_scene_ramp_up,

Area_list,

0,

1


DA_Lut_List data setup
Position from DA_Lut_List_Offset

Description

0-31

Area(s) with scenes to stop ramp up


Note: After setting up the area numbers to stop scene ramps in the DA_Lut_List Data Array, trigger this command by writing the number of areas
into the Data Array specified by Data_Array_Name at an offset specified by Data_Array_Offset.

Advertising