FIC A360 - Manual (Page 129)

Maintenance & Disassembly
2. Remove four screws of frame HDD bracket plate. Two ones of them are at the same side,
and others are at the other sides.
screws
Figure 5-7 Screws Locations of the frame HDD bracket plate
5.5.5 Removing the LCD Panel
The procedure for removing the LCD Panel is as follows:
1. Follow the steps above in removing the keyboard cover.
2. You will find the LCD panel connector with a cover attached to the system unit using two
screws. Remove the screws of the cover and pull out the FPC connector.
Two screws of LCD
panel connector
Figure 5-8 Two Screws of LCD Panel Connector
3. There are four screws securing both LCD hinges to the system unit. Two screws are at the
rear side of notebook, and the other two screws are at the under side. Remove the screws
to separate the LCD panel from the system unit.
Two
screws Two
screws
Figure 5-9 Four Screws Securing the LCD Hinges
4. Slowly pullout the LCD panel from the system unit.
FIC A360 Service Manual 5-9