FIC A360 - Manual (Page 50)

Installation and Upgrade
Enabling DMA channel for Windows 2000
1. Please click the following buttons with the procedure Start Æ SettingÆ Control Panel
Æ System Æ Hardware Æ Device Manager.
2. Select and click IDE ATA/ATAPI Controller, you will find Primary IDE Channel and
Secondary IDE channel. Please click Primary IDE Channel first.
3. Click Advanced setting Tab. Please change the selection of Transfer Mode to DMA if
available on both Device 0 and Device 1.
4. Return to previous level, please change the setting of Secondary IDE Channel as above.
5. Restart your notebook to let the setting take effect.
FIC A360 Service Manual 2-11