FIC A360 - Manual (Page 48)

Installation and Upgrade
For LAN, please follow the procedures below for installing the Askey 10/100 Mini PCI
Ethernet LAN of Combo card:
Installing LAN Driver of Combo Device for Windows 98
1. Boot Windows 98 from your hard disk and insert the disc containing the LAN driver for
Windows 98.
2. Click the Start button, then click Settings, and Control Panel. Double click System and
click Device Manager tab. Under Other devices, you'll see PCI Ethernet Controller.
3. Click Refresh button. The Add New Hardware Wizard will detect PCI Ethernet
Controller. Click Next to search for the driver.
4. Click Next to continue.
5. Tick Specify a location and click Browse button. Then, navigate to
"\Drivers\Win98\Combo\LAN" and click Next.
6. Click Next to accept the updated driver for Accton EN2242 Series Mini PCI Fast
Ethernet Adapter. Ethernet LAN driver.
7. Click Next to continue with LAN driver installation.
8. Insert the disk labeled " Accton EN2242 Series Mini PCI Fast Ethernet Adapter", and
then click OK.
9. Type "\Win98", then click "OK".
10. Click Finish to complete installation and restart Computer to finish setting up LAN.
Installing LAN Driver of Combo Device for Windows Me
1. Boot WinMe from your hard disk and insert the disc containing the LAN driver for
WinMe. The New Hardware Found Message box appears.
2. You will find the message stated searching PCI Ethernet Controller Device driver
showed in the Add New Hardware Wizard message box.
3. Select "Specify the location of the driver", and click Next.
4. Tick on "Specify a location box". Then, click Browse button and navigate to the LAN
driver location as "\Drivers\WinMe\Combo\LAN". Click Next to begin searching the
driver.
5. The Add New Hardware will found Accton EN2242 Series Mini PCI Fast Ethernet
Adapter. Click Next to continue the driver installation.
6. Click Finish button to finish installing LAN driver and click Yes to restart the computer.
Installing LAN Driver of Combo Device for Windows 2000
1. Click the Start button, then point to Settings, and click Control Panel.
2. Double-click on the System icon, Hardware and then click on the Device Manager
folder tab.
3. Under the Other Devices line, you will find Ethernet Controller. Click Scan for
hardware changes buttons to appear New Hardware Found Message Box.
4. In the Found New Hardware Wizard message box which shows searching Ethernet
Controller driver. Click Next to proceed to the next step.
5. Select "Search for a suitable driver for my device", and click Next.
6. Tick on "Specify a location box". Then, click Next and Browse buttons and navigate to
the LAN driver location as "\Drivers\Win2K\Combo\LAN". Click OK and Next to
begin searching the driver.
7. The Add New Hardware will found Accton EN2242 Series Mini PCI Fast Ethernet
Adapter. Click Yes to continue installing the driver.
8. Click Finish button to finish installing LAN driver.
FIC A360 Service Manual 2-9