FIC A360 - Manual (Page 63)

Software Functional Overview
3-6
FIC A360 Service Manual
141h 400 x 300 8-bit Packed 72 2MB
143h 400 x 300 16-bit Packed 72 2MB
144h 400 x 300 32-bitUnpacked 72 2MB
151h 512 x 384 8-bit Packed 70 2MB
153h 512 x 384 16-bit Packed 70 2MB
154h 512 x 384 32-bitUnpacked 70 2MB
171h 720 x 480 8-bit Packed 75 2MB
173h 720 x 480 16-bit Packed 75 2MB
174h 720 x 480 24-bit Packed 75 2MB
175h 720 x 480 32-bitUnpacked 75 2MB
176h 720 x 576 8-bit Packed 75 2MB
178h 720 x 576 16-bit Packed 75 2MB
179h 720 x 576 24-bit Packed 75 2MB
17Ah 720 x 576 32-bitUnpacked 75 2MB
Note: “*” The modes may not be available. Their availability should be determined by VESA
function calls.
Panel Type Initialization
The VGA BIOS will issue INT 15h function call during POST. This function call
allows the system BIOS to specify the panel type to the VGA BIOS. The system BIOS
should get the panel type from GPIO pins before the VGA chip initialized, and pass
this information to VGA BIOS through INT 15 Function 5F01h.
LCD Panel ID pin Definition:
VT82C686B GPI Pins
GPI [23] GPI [17] GPI [11] GPI [10]
Panel Type
0 0 0 0 ADI 12.1” SVGA TFT AA121SJ23
0 0 0 1 Hannstar HSD121PS11
0 0 1 0
0 0 1 1
0 1 0 0 ADT L133X3-1
0 1 0 1 Unipac UB133X3-1
0 1 1 0
0 1 1 1
1 0 0 0 CPT CLAA141XC01
1 0 0 1 Hyundai HT14X13-101
1 0 1 0
1 0 1 1
1 1 0 0
1 1 0 1