6 removing the heat sink plate, Maintenance & disassembly – FIC A360 User Manual
Page 130
Advertising
Maintenance & Disassembly
5. To remove the LCD panel, you need to disassemble the LCD bezel and LCD cover back.
Remove six screws on the front bezel as shown in the figure below. Then, carefully
separate the front bezel cover from the LCD assembly.
Hinges
Six Screws
Figure 5-10
LCD Bezel Screw Locations
5.5.6 Removing the Heat Sink Plate
1. Release seven screws as shown in the picture below.
screws
Figure 5-11
Remove heat sink plate
2. Remove heat sink plate by slightly lifting it up.
5-10
FIC A360 Service Manual
Advertising