FIC A360 - Manual (Page 42)

Installation and Upgrade
2.2.3 Installing the VGA Device Driver
Your notebook computer uses the high-performance S3 Savage4 VGA controller, which is an
AGP 4x video local bus, 2D/3D Graphic Engine. Following is the procedure for installing the
VGA Driver for Windows 98, Windows Me and Windows 2000:
Installing VGA Driver for Windows 98
1. Boot Windows 98 from your hard disk and insert the disc containing the VGA driver for
Windows 98.
2. Click the Start button, then click Settings, and Control Panel. Double click System and
click Device Manager tab. Under Display Adapters, you'll see Standard PCI Graphics
Adapter (VGA). Select it and double click it.
3. Choose Driver button and then click Update Driver, Next, and Next again to search for
the driver.
4. Tick Specify a location and click Browse button. Then, navigate to
"\Drivers\Win98\VGA" and click Next.
5. Click Next to accept the updated driver for S3 Graphics Inc Twister driver.
6. Click Next to continue with VGA driver installation.
7. Click Finish to complete installation.
8. Restart Computer to finish setting up VGA.
Installing VGA Driver for Windows Me
1. Boot Windows Me from your hard disk and insert the disc containing the VGA driver for
Windows Me.
2. Click the Start button, then click Settings, and Control Panel. Double click System and
click Device Manager tab. Under Display Adapters, you'll see Standard PCI Graphics
Adapter (VGA). Select it and double click it.
3. Choose Driver button and then click Update Driver, Next, and Next again to search for
the driver.
4. Select "Specify the location of the driver" and click Next to continue.
5. Tick on "Specify a location box". Then, click Next and Browse buttons and navigate to
the VGA driver location as "\Drivers\ WinMe\VGA". Click OK and Next to begin
searching the driver.
6. The Update Device Driver Wizard will found S3 Graphics Inc. Twister. Click Next to
continue installing the driver.
7. Click Finish button to finish installing VGA driver and Yes to restart the computer.
Installing VGA Driver for Windows 2000
1. Click the Start button, then point to Settings, and click Control Panel.
2. Double-click on the System icon, Hardware, and then click on the Device Manager
folder tab.
3. Under the Other Devices line, you will find the Video Controller (VGA compatible),
and then Scan for Hardware Changes buttons to appear the New Hardware Found
Message Box.
4. In the Found New Hardware Wizard message box which shows searching Video
Controller (VGA compatible) driver. Click Next to proceed the further step.
5. Select "Search for a suitable driver for my device", and click Next.
6. Tick on "Specify a location box", then, click Next and Browse buttons, and then
navigate to the VGA driver location as "\Drivers\ Win2K\VGA".
7. Click OK and Next to begin searching the driver. The Add New Hardware will found S3
Graphics Inc. Twister.
FIC A360 Service Manual 2-3