GE ML1600 - Manual (Page 103)

CHAPTER 6: ACCESS CONSIDERATIONS CONFIGURING PORT SECURITY THROUGH THE COMMAND LINE INTERFACE
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 6–7
Z (Optional step) Add any specific MAC addresses, if needed, to allow
designated devices to access the network (use the
add
mac=00:c1:00:7f:ec:00 port=11,15 command).
Z Disable access to the network for unauthorized devices (Use
action port=11 <diable|drop> depending on whether the
port should be disabled or the packed dropped. Follow that with a
show port-security command to verify the setting).
Z (Optional step) Set the notification to notify the MGMNT station on
security breach attempts (use the command
signal port to
make a log entry or send a trap).