GE ML1600 - Manual (Page 122)

7–10 MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
CONFIGURING 802.1X WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE CHAPTER 7: ACCESS USING RADIUS
The following figure illustrates the editing of information for the RADIUS server. Note the
UDP port number can be left blank and the default port 1812 is used.
After configuring the server information, specific port information is configured.
Z Select the Configuration > Radius > Port > Set menu item to
configure the RADIUS characteristics of each port.
Z To edit the port settings, click on the edit icon ( ).