GE ML1600 User Manual
Page 284
17–22
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
COMMAND REFERENCE
CHAPTER 17: MISCELLANEOUS COMMANDS
•
show snmp
: displays information related to SNMP
•
show sntp
: displays the configured SNTP servers details
•
show stats
: displays the port statistics
•
show stp
: displays Spanning Tree Bridge parameters
•
show subnet
: displays the Subnet Mask of the system
•
show ssl
•
show sysconfig
: displays system configurable parameters
•
show syscontact
: displays the current system contact
•
show syslocation
: displays the current system location
•
show sysname
: displays the current system name
•
show time
: displays the system time
•
show timeout
: displays the system inactivity time out
•
show timezone
: displays the configured time zone of the device
•
show uptime
: displays up time of the system
•
show users
: displays all configured users
•
show version
: displays current version of the software
•
show vlan
: displays the VLAN parameters of a specified type
•
show web
The set commands are listed below.
•
set bootmode
•
set date year
•
set daylight country
•
set prompt
•
set logsize
•
set password
: sets the current user password
•
set snmp
•
set stp
•
set time
•
set timeformat
•
set timeout
: sets the system inactivity time out
•
set timezone
•
set vlan
: sets the VLAN type
The context-less commands are listed below.
•
clear
: clears the event log, command history, or screen
•
climode
: to set the interactive CLI mode
•
enable
: allows to login as another user
•
help
•
host
: to generate the host table for FTP users
•
more
: to set more pipe in screen outputs
•
save