1 example, Software -11, Xample – GE ML1600 User Manual
Page 257
CHAPTER 16: SNMP
CONFIGURING SNMP WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
16–11
16.3 Configuring SNMP with EnerVista Secure Web Management Software
16.3.1 Example
Most SNMP v1 capabilities can be set using the EnerVista Secure Web Management
Software. For SNMP v2 and v3 parameters, please refer to Configuring SNMP through the
Command Line Interface on page 16–5.
SNMP variables are used in conjunction with Alert definitions. Alert Definitions are covered
in the next chapter.
Z
To configure SNMP, select the Configuration > SNMP menu item.
Z
Use the Edit button to change the SNMP community parameters.
Z
Use the Add buttons to add the MGMNT and trap receivers.
The following window illustrates changes to the SNMP community parameters. It is
recommended to change the community strings from the default values of public and
private to other values.