GE ML1600 - Manual (Page 23)

CHAPTER 1: INTRODUCTION COMMAND LINE INTERFACE SOFTWARE
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 1–15
ping
set
show
telnet
terminal
walkmib
whoami
ML1600>
The following example lists commands starting with a specific string
ML1600> s <TAB>
set
show
ML1600>
In the following example, the <TAB> key completes the command:
ML1600> se<TAB>
password
timeout
vlan
ML1600> set
1.5.10 Exiting
To exit from the CLI interface and terminate the console session use the logout
command. This command prompts to ensure that the logout was not mistakenly typed.
The following syntax applies:
logout
The following example illustrates logging out from a session:
ML1600> logout
Logging out from the current session [’Y’ or ’N’] Y
Connection to the host lost