GE ML1600 - Manual (Page 287)

CHAPTER 17: MISCELLANEOUS COMMANDS COMMAND REFERENCE
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 17–25
The port mirroring commands are shown below. Refer to Port Mirroring on page 9–1 for
additional details.
• help port-mirror
• prtmr : enables/disables port mirroring functionality
• setport : defines the port mirroring ports
The port security commands are shown below. Refer to Securing Access on page 6–1 for
additional details.
• action : sets the action type of secured port
• allow : allows MAC addressing per port
• help port-security
• learn : enables/disables security for a single port or group of ports
• ps : enables/disables security in system
• remove : removes MAC addressing per port
• signal : sets the signal type of the secured port
The quality of service (QoS) commands are shown below. Refer to QoS Overview on page
14–1 for additional details.
• help qos
• setqos : configures QOS configuration usage
• set-untag
• set-weight : sets the port priority weights for all the ports in all the device
• show-portweight : displays the current port weight priority
The remote monitoring (RMON) commands are shown below. Refer to Configuring RMON
on page 16–14 for additional details.
• alarm : sets the owner for the alarm group
• event : sets the owner for the event group
• help rmon
• history : sets the owner for the history group
• statistics : sets the owner for the statistics group
The Rapid Spanning Tree Protocol (RSTP) commands are shown below. Refer to Rapid
Spanning Tree Protocol on page 13–1 for additional details.
• cost : sets the path cost of ports
• forceversion : set the force version of STP
• help rstp
• lll
• port : sets the RSTP administration status of ports
• priority : changes the priority of ports or bridge
• rstp : changes the RSTP administrative status of the bridge
• show-forceversion : shows the current force version of RSTP
• show-mode : shows the port mode status
• show-timers : shows the bridge time parameters
• timers : changes the bridge time parameters