GE ML1600 - Manual (Page 274)

17–12 MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
HISTORY CHAPTER 17: MISCELLANEOUS COMMANDS
17.5 History
17.5.1 Commands
The commands below may be useful in repeating commands and obtaining history
information.
The !! command repeats the last command.
!!
The !1 , !2 ,..., !n commands repeat the nth command (as indicated by a show history).
!<n>
The
show history
command displays the last 25 executed commands. If less than 25
commands were executed, only those commands executed are shown.
show history
The history is cleared if the user logs out or if the switch times out. The history count
restarts when the user logs in.
The show version command displays the current software version.
show version