Motorola ATCA-717 - Manual (Page 16)

16 PENT/ATCA−717
Order No. a Description Date Rev.
226132 AA May 2005 Changed logo, copyright, ... from
Force Computers to
Motorola;generalized safety notes
regarding maximum combined
power dissipation of installed PMC
modules; in power requirements:
added exceptions applicable to US
and Canada; in standard
compliances: removed IEC60068
(officially withdrawn) and
UL94V−0/1 (already covered by
60950 and NEBS) standard; added
section "Restoring BIOS Default
Settings"; added "Restore BIOS
Default Settings" procedure; added
info on redundant FPGA feature
(section Devices Features and
Datapaths−>FPGA); in switch
setting description and Flashes
section: renamed boot flash to
default flash and user flash to
backup flash; extended description
of redundant flash feature; in
standard compliances section:
added note on NEBS compliance
and grounding; adapted figures
showing the blade face plate to new
Motorola face plate; added note to
section "Updating BIOS"; updated
list of IPMI sensors in section:
Intelligent Platform Management
Controller
in section "Switch Settings"
extended description of "Clear
CMOS RAM" and "Serial COM port
swapping" switch ; extended section
BIOS−>Serial Console
Redirect−>Default Configuration;
added section "About this Manual"