Motorola ATCA-717 - Manual (Page 46)

Installation On−Board Hardware Accessories
46 PENT/ATCA−717
On−Board Hardware Accessories
The following hardware upgrades can be installed on the blade:
S PMC modules
S Hard Disk
S CompactFlash card
S CMC module
PMC Modules
The blade provides four PMC slots supporting PCI/PCI−X based PMC modules. When
operated in PCI mode, PMC modules run at 33/66Mhz, when operated in PCI−X mode
they run at 66/100MHz. All four PMC slots use a signaling level of 3.3V.
aaaaa
The four PMC slots are numbered from 1 to 4. Their location is shown in the following
figure.
a