Motorola ATCA-717 - Manual (Page 31)

Features Introduction
PENT/ATCA−717 31
Features
The PENT/ATCA−717 is an AdvancedTCA compliant single blade computer offering
high processing performance. Four on−board PMC sites, GBit Ethernet connection to the
AdvancedTCA Base and Fabric interface as well as standard I/O interfaces make it ideal
for telecommunication and datacom applications. An on−board 16−port Ethernet switch
allows switching between PMC sites, Base and Fabric interface and the base board.
aaa
Important features are:
S Pentium M processor with up to 1.8 GHz speed
S Up to four GByte main memory DDR2 SDRAM with ECC protection
S Designed for PICMG 3.0 and 3.1 compliant systems
S 16−port Ethernet switch with host interface for configuration and management
S Redundant AdvancedTCA Base interface
S Up to eight AdvancedTCA Fabric Channel interfaces
S Four 64−bit/100MHz PCI−X compliant PMC slots
S Two USB 2.0 interfaces at face plate
S Optional on−board CompactFlash and 2.5 inch hard disk
a
S Support for Windows 2000/2003 and Carrier Grade Linux Ed. 3.1
S Intelligent Platform Management Controller (IPMC) compliant to IPMI V.1.5 with
redundant IPMB support
S Support for four PMC Modules with Telecom clocking synchronization
S Different accessory kits, for example:
− Rear Transition Modules (RTMs)
− CMC debug module
− Hard disk accessory kit
− Cable accessory kits